Product ID:EUTEC-SILWELD 1618
MSDS Date:05/08/1992
FSC:3439
NIIN:00N031717
MSDS Number: CBBTG

EUTECTIC CORP

40-40 172ND ST
FLUSHING, NY 11358-2799
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

SEE ANSI AWS F1.1 & AWS F1.3 "EVAL CONTAMS IN

RTECS: 9999999ZZ

TRAIN WELDER TO KEEP HIS/HER FACE AWAY FROM FUME/DUST

RTECS: 9999999ZZ

& FULL LENGTH FACESHIELD . WEAR APPROP FILTER

RTECS: 9999999ZZ

WEAR CONTACT LENSES.

RTECS: 9999999ZZ

ZINC (SARA 313) (CERCLA)

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 10-20%

OSHA PEL N/K

ACGIH TLV: N/K

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

POTASSIUM PENTABORATE

CAS: 11128-29-3

OSHA PEL N/K

ACGIH TLV: N/K

TIN

CAS: 7440-31-5

RTECS: XP7320000

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3

COMPOSITION & QTY OF THESE DEPEND ON METAL BEING

RTECS: 9999999ZZ

USED. OTHER CNDTNS WHICH INFLUENCE COMPOSITION & QTY

RTECS: 9999999ZZ

TO INCL COATINGS ON WORKPIECE (PAINT, GALVANIZING,

RTECS: 9999999ZZ

QUALITY & AMT OF VENT, POSITION OF WORKER'S HEAD

RTECS: 9999999ZZ

CONTAMINANTS IN ATM (SUCH AS CHLORINATED HYDROCARBON

RTECS: 9999999ZZ

WELDING, TERMAL SPRAYING & ALLIED PROCESSES, FUME &

RTECS: 9999999ZZ

LISTED INGREDS. DECOMP PRODS OF NORM OPERATION INCL

RTECS: 9999999ZZ

OXIDATION OF MATLS LISTED PLUS THOSE OF BASE METAL

RTECS: 9999999ZZ

MAY INCL COMPLEX OXIDES OF LISTED METALS; FLUX

RTECS: 9999999ZZ

SILICA. GASEOUS RXN PRODS MAY INCL OZONE, CARBON

RTECS: 9999999ZZ

INERT GASES USED AS SHIELDING GASES. ONE RECOM WAY

RTECS: 9999999ZZ

TO WHICH WORKERS ARE EXPOS IS TO TAKE AN AIR SAMPLE

RTECS: 9999999ZZ

SILVER (SARA 313) (CERCLA)

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: 30-40%

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

POTASSIUM FLUORIDE

CAS: 7789-23-3

RTECS: TT0700000

OSHA PEL 2.5 AS F (MFR)

ACGIH TLV: 2.5 AS F (MFR)

COPPER (SARA 313) (CERCLA)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 10-20%

OSHA PEL 0.1MG/M3 FUME;1 DUST

ACGIH TLV: 0.2 MG/M3 FUME

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:LITTLE OR NO HAZS EXIST FOR ARC
WELDING ELECTRODES & BRAZING RODS BEFORE THEY ARE USED IN WELDING
PROCESS. INHAL:FUMES ASSOC W/HEATING, WELDING, BRAZING, SOLDERING
OR CUTTING METALS CAN BE DANGEROUS T O HLTH & OVEREXP CAN CAUSE
LUNG DMG &/OR OTHER ORGAN DMG. USE ADEQ VENT TO KEEP BELOW EXPOS
LIMS. KEEP (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:FUMES & GASES FROM BRTHG ZONE-KEEP
WELDER'S HEAT OUT OF FUMES. EYE/SKIN CNTCT:ARC RAYS & UV LIGHT CAN
INJURE EYES & BURN SKIN. HANDLE W/CARE. WEAR PROPER EYE, EAR & BODY
PROT. ELECTRIC SHOCK CAN KILL.
Medical Cond Aggravated by Exposure:AGGRAVATION OF PREEXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

First Aid:INHAL: MOVE TO FRESH AIR SOURCE. CONTACT MD AND ADVISE OF
INGREDIENTS. SKIN: THOROUGHLY WASH HANDS OR AFFECTED AREAS WITH
SOAP AND WATER TO REMOVE ALL RESIDUE. IF RASH OR BURN DEVELOPS
CONSULT MD. EYE S: THOROUGHLY FLUSH EYES WITH WATER FORAT LEAST 15
MINUTES TO REMOVE ALL RESIDUE. ADVISE MD OF INGREDIENTS. INGEST:
CALL MD AND/OR LOCAL POISON CONTROL CENTER. ADVISE OF INGREDIENTS.

Extinguishing Media:CARBON DIOXIDE, DRY CHEMIAL FOAM TYPE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . TOXIC FUMES MAY BE PRODUCED.
Unusual Fire/Explosion Hazard:NONFLAMMABLE. WELDING ARC, SPARKS AND
FLAMES CAN IGNITE COMBUSTIBLES AND FLAMMABLES.

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PLEASE READ AND UNDERSTAND THE PRODUCE
LABEL INFORMATION FOR PROPER PROCEDURES AND USE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:IF THE WORK STATION IS NOT PROPERLY VENTILATED
TO EXHAUST ALL FUMES, VAPORS & DUSTS BELOW THE RECOMMENDED EXPOSURE
LIMITS, USE A NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:USE ENOUGH GEN VENT & LOC EXHST AT WORK SITE TO KEEP ALL
FUMES & DUST FROM WORKER'S BRTHG ZONE & GEN AREA. (ING 20)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (ING 21)
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER FULL
PROT EQUIP NORM USED IN WELDING/BRAZING OPERATIONS TO PVNT SKIN
CNTCT.
Work Hygienic Practices:ALWAYS WASH HANDS THOROUGHLY AFTER USE.
Supplemental Safety and Health
HAZ DECOMP PRODS: IMPLY EXISTENCE OF ANY HAZ. WELDING ELECTRODES,
BRAZING ALLOYS & SOLDER SOLIDS AS SHIPPED ARE STABLE, NONFLAM,
NONEXPLO & IN MOST CASES NONREACTIVE. FUMES, GASES & DUSTS GIVE OFF
DUR ING HEATING, WELDING, BRAZING, SOLDERING, CUTTING OR THERMAL
SPRAY PROC CANNOT BE CLASSIFIED SIMPLY. (ING 7)

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TERM "HAZ" SHOULD BE INTERPRETED AS
DEFINED IN OSHA HAZ COMMUNICATION STD (29 CFR 1910.1200) & DOES NOT
NEC (SUPDAT)

Waste Disposal Methods:DISPOSE OF IN AN ENVIRONMENTALLY SENSITIVE
MANNER IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS. USE
APPROPRIATE MEASURE TO KEEP AIRBORNE DUST LEVELS CONTAINED IN
ACCORDANCE WITH EXPOSURE LE VELS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.